water jetting services

February 24 2020

What Are The Different Types Of Water Jetting Services?

Are you looking for ways to solve the blocking issues in your kitchen on a more permanent basis? Do the concrete surfaces of your business premises concrete appear dull and tarnished?

Do you need to dig a trench without decimating the surrounding land? Well, water jetting services fit the bill as a solution to all these needs.

Water jetting, which essentially is high-pressure streams of water (sometimes containing particles) that are used to break up particles, has gained immense popularity in domestic and commercial settings.

Herein we will explore the various uses of water jetting and, therefore, delve into the various water jetting services you can get, including:

Surface cleaning,
Concrete refurbishment,
Drainage and sewer cleaning,
Decontamination, and
Cleaning boats hulls and buoys,
Surface cleaning,

#1. General Surface Cleaning

Whether it is wood, concrete, and in some cases, metal, you can expect some tarnishing over time. Stains will accumulate in the pores of concrete and timber while metal surfaces will form an oxide layer at the surface.

Inevitably, you can expect such surfaces to get tarnished, thereby losing their aesthetic appeal.

When in need of a thorough clean, you can always rely on water jetting. The high pressure associated with the water jet dislodges debris that stains the surface, thereby revealing the true colours of the surface.

#2. Concrete Refurbishment

Water jetting is also used in concrete refurbishment as it allows users to cut a damaged section concrete slab and replace it without damaging the surrounding materials.

In the case of steel-reinforced concrete, water jetting enables the removal of damaged concrete, without damaging the rebar. Essentially, water jetting allows for targeted concrete removal.

#3. Drainage And Sewer Cleaning

Flashing grease, sludge, oil, mud, hair, debris, or even sand will inevitably cause an accumulation of debris that leaves the drain and sewer lines susceptible to blockage.

Moreover, typical drain and sewer lines are susceptible to mineral scaling, and tree roots intrusion, all of which can block the drainage.

Water jetting is undoubtedly the best solution to clear the drain and sewer line of blocking debris. Unlike other debris removal solutions, water jetting pulverises the gunk that blocks the lines, restoring the full flow of wastewater.

#4. Decontamination

Water jetting has and can be used in decontamination exercises. This is especially the case when it comes to removing deep surface contamination in high population areas such as buildings.

The high-pressure water flushes out contaminants deep within the surface of building materials, thereby performing decontamination in the process.

#5. Hull And Buoy Cleaning

As a boat cruises along the ocean, its hull and buoys accumulate a lot of debris in the form of salts and biological matter.

Left unchecked, the salt accumulation and growth of algae and other organic matter will damage the hull or destroy it completely. Water jetting is an effective yet gentle way of cleaning the hull.

The high pressure cleans the surface of the hull as well as buoys, as part of water regular maintenance.

#6. Surface Preparation

Construction industry specialists recommend water jetting as the to-go-to surface preparation method.

In fact, in some instances, water jetting is the only surface preparation method that you can use owing to its environmental compatibility and technical benefits.

The technology not only gets the job done, but it is also cost-effective.

Conclusion

While water jetting is now commonly associated with drainage and sewer line cleaning, the technology has a lot more flexibility than many would think. We offer our water jetting services in a wide variety of environments and utilities.

Whether you need your drainage lines cleaned or you want to restore the concrete installation in your home or business premises, we are up to the task.

IF YOU HAVE A PROJECT THAT REQUIRES LIQUID OR SOLID WASTE REMOVAL, OR HYDRO EXCAVATION, PLEASE CALL US TODAY ON 0419 577 441 OR CONTACT US THROUGH OUR WEBSITE.

December 6 2019

The Best Ways to Clear Tree Root Blocked Drains

maj News blocked drains, blocked sewers, tree roots blocked drains, water jetting services

Trees and shrubs are good for your yard as they add up to the aesthetics and give you a pleasurable outdoor space to sit and enjoy during the summer. However, did you know that tree roots are a huge threat to your underground drains?

They might be all pretty on the outside when they shed flowers, but beneath the ground, the roots could be wreaking havoc on your pipes.

Such a situation should be handled carefully as you naturally want to keep your plants and retain a sewer system that is working optimally. So please read on and find out how to clear tree roots that have blocked your drains.

How Do They Block Drains?

Before we go into the process of removing these roots from your drain, it is vital to understand how they interfere with your pipes.

Roots pose a more significant risk to the older sewer pipes that were made of clay or material that is not entirely sealed. Roots can penetrate clay pipes since clay is essentially soil and can become soft when exposed to water for a long time.

Roots just require a little bit of softness to penetrate, and once a tiny thread penetrates, it will start growing into the crack and make it bigger, allowing more roots to get in.

For pipes that are not completely sealed, a small root will find its way into the opening and grow, expanding it with it.

They grow according to the constraints in their close environment, and once they get into the pipe, they will grow into it and cause bigger cracks.

There is no one-fits-all approach to removing roots that block drains and it all comes down to the extent of the damage. This will guide you on the best course of action to take. Following are some of the methods you can use to remove tree roots:

Cutting Roots Mechanically

This is one of the most rugged ways of solving this problem. It works if the pipes are not very deep underground and you can see the blockage by digging up a small patch of dirt. With this method, you will require a mechanical auger.

It also applies to trees with massive roots that are protruding above the ground. There are special mechanical augers that have a rotating head that can be sent down the drain.

This action cuts the roots and clears them from the line, but this does not solve the problem permanently as they will start growing back almost immediately.

Chemical Tree Root Removal

There are special chemicals that can be used to kill roots and prevent them from growing into your drain. Copper sulphate septic treatments are the common ones, but you will get several other brands available on the market.

This method is better than the first one as it creates a layer of poison in the soil that kills the roots before they can grow into the drain. All you need to do is apply them around the drain and roots won’t grow beyond their protective layer.

Other treatments are applied on the pipes, and once they coat the entire diameter, they can prevent invasion from roots growing from above as well.

Hydro Jetting

This is an effective but costly way of cleaning your drains. You need to use a hydro jetter which is a pump that pushes pressurised water through the duct.

In this process, the water clears all the roots in the pipe, and after that, the line can be flushed with a chemical to kill any roots that might still be present.

Conclusion

Some of the best ways to clear roots from your sewer line have been mentioned above and in some cases, you might need to try all of them to ensure that your pipes are completely free of any roots.

Prevention is better than cure when it comes to keeping roots away and you need to be wary of how close trees are to your utility lines.

If planting trees and shrubs, keep them away from these lines, and while you might sacrifice on where you want your shade to be, you will save up a lot of money on pipe replacements down the track.

IF YOU HAVE A PROJECT THAT REQUIRES LIQUID OR SOLID WASTE REMOVAL, OR HYDRO EXCAVATION, PLEASE CALL US TODAY AT PRESSURE WORKS ON 0419 577 441 OR CONTACT US THROUGH OUR WEBSITE.

August 18 2019

What Are Professional Water Jetting Services Used For?

maj News blocked sewers, Dewatering Solutions, liquid waste disposal, waste handling, water jetting services

The performance of a sewer line or plumbing line is reliant on discharge flowing unobstructed and freely.

Any clog that builds up in the plumbing line impedes the free-flow of the wastewater.

In worst-case scenarios, the blockages can render a plumbing line or sewer line useless as it cannot evacuate the wastewater from a house or commercial property.

While there are plenty of technologies and techniques used to remove the obstruction and unblock the plumbing line and sewer line, water jetting is probably the best solution in use today.

It combines elements of being effective, non-destructive, and versatile. You can use water jetting for:

Routine plumbing maintenance.
Unblock clogged plumbing systems
Remove severe and tough obstructions from the sewer lines and plumbing.
High-pressure surface cleaning.

What Is The Use Of Water Jetting Services?

#1. Water Jetting For Routine Maintenance – Regular maintenance of the plumbing system is essential to its longevity and proper functionality.

As such, regular and scheduled cleaning of the plumbing system is necessary to reduce the build-up of clogs.

Professional plumbers use water jetting to clean the plumbing system and the sewer lines.

Pressure Works Drain cleaning services ensure that the inside channels of the plumbing system and in some cases, the outside of the surfaces of the lines, are free of any obstructions.

#2. Water Jetting For Emergency Blockages – Aside from the regular maintenance of plumbing lines, water jetting is used in emergency cases.

Even with proper maintenance, your plumbing or sewer line can still get clogged.

The high-pressure water jet, in such cases, is used to unblock the drainage by pulverising the clogging materials, allowing wastewater to flow unobstructed.

It breaks down the debris and sludge while emulsifying the oils and grease, leaving the plumbing clean.

Furthermore, the high-pressure water jet is also capable of handling emergency tree root removal.

#3. Getting Rid Of Tough Obstructions In The Plumbing Lines – A wide variety of causes can cause plumbing blockage.

While grease and oils are the most common of blockage debris, there are plenty of other items that can block the drains and the sewer lines.

Think of hardened scale, globes of hair, chewing gum, plastics and other things that need to be removed.

Traditionally, unblocking drains and sewer lines blocked by such tough items meant disassembly of the pipes and sewer lines.

Water jetting allows plumbers to unblock the drains without having to go through the process of drain disassembly.

#4. Water Jetting For High-Pressure Cleaning – Water jetting is also used for cleaning.

A high-pressure unidirectional water jet has the capacity and capability to get rid of any type of tough dirt, grime, and grease.

As such, water jetting is used to clean, restore and refurbish concrete, wooden surfaces, tile surfaces, and much more giving such surfaces a new shine.

In the same light, water jetting is also used to remove paint, graffiti, and chewing gum.

The high-pressure water jet is capable of obliterating the dirt and paint that covers surfaces, leaving a clean surface behind.

Final Thoughts

Water jetting has proved to be effective in cutting through fat, oil, grease, soil debris, hardened scale, roots, and much more.

Therefore, it can effectively deal with any and all types of obstructions that a typical commercial, industrial, and residential property experiences.

As the process is non-destructive, it ensures your delicate plumbing systems do not suffer from damage in the cleaning process.

By carrying out proper investigations of where the clog is, and using the right-size hydro-jetting head further, you can reduce the chances of damaging the plumbing system.

Whether you are in need of having a septic tank emptied, or you want a blocked sewer de-clogged, it is important that you call in a professional service.

If you have a project that requires a water jetting service, please call us today on 0419 577 441 or contact us through our website https://www.pressureworks.com.au/contact/.